916 reviews analysed
1. Cen-Tec Systems 93059 Central Vacuum Kit with Switch Control 50′ Hose, 50 Ft
- Compatible with all major brands of central vacuum systems equipped with industry standard pin jack inlet valves, including: beam, Electrolux, vacuflo, vacumaid, nutone, hayden, md, canavac, cyclovac
- The wall end is designed to fit nutone and other inlets with a measured 1.50 Diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles
- Comes with two floor nozzles
- One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
2. OVO Air-Driven Multi Brush Set-50ft Vac Dual Votage Switch Control Hose Central Vacuum Carpet Attachment Cleaning Tool Kit, 50ft, Black and Grey
- ON/OFF switch control 50 ft. low-voltage crushproof hose with button lock
- air-driven carpet beater (perfect for entrance and decorative rugs)
- 12” deluxe floor brush (ideal for tiles & wood floors)
- Dusting brush, upholstery brush, crevasse tool and chrome hose hanger
- Deluxe storage accessory organizer
- Free Technical Support Toll Free at 1. 800. 776. 7891 or Email at [email protected] net
3. Cen-Tec Systems 99713 Central Vacuum 35 Foot Universal Connect Low Voltage Hose with Hose Sock and Button Lock Stub Tube
- Universal hose end insures compatibility
- 35 Feet of hose length, helping you be able to reach in every hard-to-get-to corner of the room
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Includes a soft-grip handle with a great ergonomic feel
- Includes an installed 35 foot knit hose sock, which protects furnishings from scratches from the hose
The 99713 is designed to provide superior airflow in a lightweight design to address the two features most desired in a central vacuum on/off control hose. The 360 degree swivel handle is designed to reduce kinking, stress on the hose, and stress on you as the user by relaxing any tension in the hose as you move through the room. The 35 foot length provides extra reach and insure there is sufficient length to prevent tugging and pulling to reach to the corner of the room. The installed hose sock is designed to reduce the possibility of marking walls, floor, or furnishings while also avoiding wear to doorframes and chair legs. The hose is compatible with industry standard central vacuum inlets including Nutone branded valves equipped with low voltage contacts in the opening of the inlet valve. You can confirm suitability by putting your finger into the hose opening and confirming there are two low voltage contacts on the upper surface of the opening. No need for concern as these contacts are low volt and will not harm you in any fashion. The 99713 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands.
4. ZVac Universal Central Vacuum Hose – 30FT Direct Connect Low Voltage Electric Hose with On/Off Button – Ergonomic Swivel Handle – Compatible with Beam, Nutone, Electrolux, Hayden & More – Silver
- INCLUDED – 1) Universal Central Vacuum 30FT Direct Connect Low Voltage Electric Hose with Ergonomic Gas Pump Swivel Handle and On/Off Central Vacuum Button. Silver and Black Color
- COMPATIBLE – This is a universal central vacuum hose that is compatible with major central vacuum brands that include Miele, Nutone, Beam, Vacumaid, Vacuflo, Electrolux, Hayden, Centralux, Eureka, Hoover & More. This fits central vacuum inlets with 2 pins. Requires 1 1/2″ diameter central vacuum inlets.
- CENTRAL VACUUM HOSE – High durability crush proof central vacuum hose tube. Hose length allows to cover large cleaning surface area. Central vacuum hose is 30 feet in length and covers around 950 SQ. FT. Hose handle includes a On/Off switch that will power your central vacuum system from the electrical central vacuum inlets.
- CENTRAL VACUUM HANDLE – This central vacuum hose will include a ergonomic handle with foam grip and 360° swivel. The handle is a gas pump style central vacuum handle similar to the Plastiflex hoses. Hose handle will also include a central vacuum wand button lock. This button is meant for central vacuum wands that require a button lock to stay in place.
- Generic, Not An OEM Product, Marks and Models Mentioned For Compatibility Purposes Only
Enhance your Central Vacuum System with Crush-Proof Central Vacuum Hose! This lightweight hose helps you cover those tough-to-reach spots to ensure a spotless home and includes a direct-connect plug-in to use with electrified inlets. The durable vinyl over wire construction has a dark gray finish to ensure long-lasting use. The crush-proof vacuum hose features a soft touch-grip handle that has a full 360 degree swivel and ergonomic hand positioning to ensure a comfortable grip. It’s easy to use with the thumb-slide on/off switch.
- Universal Central Vacuum 30FT Direct Connect Low Voltage Electric Hose – Silver
- 30 feet in length covers up to 950 SQ. FT.
- Crush proof hose tubes.
- Ergonomic swivel handle.
- Button locking.
- On/Off button.
- Low voltage hose cuff.
- Foam grip.
5. Cen-Tec Systems 94093 35 Ft. Low Voltage Central Vacuum Installed Hose Sock, Light Gray
- 1.375” x 35 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacumaid, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m + s, md, imperium, and most regional brands
- The eva body and pearl gray color will not mark walls, floors, or furnishings and the 35 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
- The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide a simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
- Low voltage hose, so it is not compatible with electric power nozzles
- The locking stub tube is ideal for insuring the wand stays in place, avoiding unintended separation
- Features an installed soft cotton lycra blend hose sock which smooths the surface of the hose to prevent damage to base boards, door jambs, and fine furnishings in the home. The sock is treated with an anti-microbial to protect your home environment
- Hose is made in the USA
6. 30ft Beam Central Vacuum Basic Hose
- Top Quality light-weight Durable and crush-proof Hose, color may vary according to availability: black or grey
- Fits all models with 1.5 inch standard inlet valves
- Warning: Some older NuTone Wall Inlet Valves are smaller than 1.5 inch
- Metal friction-fit handle with 1.25 inch O.D.
- Free Technical Support, please call 929.800.2980
Crush-proof lightweight and easy to use, the Beam Compatible Basic Central Vacuum Hose is an upgrade to older basic vacuum hoses. Fits Standard 1.5 inch inlet valves. Nutone users: please measure your wall valve carefully as some older Nutone wall valves are smaller than 1.5 in.
7. Cen-Tec Systems 90660 Central Vacuum 50 Foot Low Voltage Hose with Button Lock Stub Tube, Ft
- Compatible with major brands of central vac, including beam, no-one, Electrolux, Hayden, vacuumed, aggressor, md, Canavan, cyclonal, Honeywell
- 50 feet of hose length, helping you be able to reach further than with standard hoses
- Made in the USA
- Includes a soft-grip handle with a great ergonomic feel
- High quality, resulting in great suction to go along with the excellent flexibility
The 90660 is an individually packed 50 foot low voltage hose and chrome button Lock stub tube. The hose also features soft grip handle with n style (Xs6) wall end. Our low voltage hoses are high quality, resulting in no kinks and great suction to go along with the excellent flexibility. The hose is silver in color, while the handle is black. This low voltage hose will fit into standard central vacuum inlet valves, providing suction to 1. 25 inch tools, wands, and attachments. Please not that this is a low voltage hose, and will not power electric power nozzles. This will work with standard central vacuum valves, but may not work with non-standard sizing without an adapter.
8. Cen-Tec Systems 99867 Silver Vacuum Hose Kit, 50-Feet
The 1.25″ (32mm) 99867 crush proof vacuum hose is ideal for commercial and domestic vacuum applications including dry, wet-dry, central vacuums, extraction equipment and as a general use vacuum hose demanding excellent flexibility and a smooth interior for superior air flow. The 99867 hose accepts standard threaded vinyl cuffs and bent ends making it immediately compatible with commercial vacuum equipment, central vacuum inlets, and both metal and plastic standard vacuum wands. This hose is silver in color.
9. Cen-Tec Systems 91431 Complete Central Vacuum Accessory Kit with Metal Wands
- Designed to provide a basic set of accessory tools for a central vacuum. The 91431 features a 1.25” x 30 foot non-electric hose produced using a unique process that provides a very smooth interior for superior airflow and quieter use
- The 13” metal friction curved end is designed to swivel over the hose meaning less stress on you and the hose. Friction indicates that all tool to tool connections are made by the two parts wedging, pressing together without a physical locking mechanism
- The wall end is an industry standard 1.50” on the outer diameter making it compatible with all major central vacuum inlets which have a 1.50” inlet with the exception of a nutone branded inlet which has a slightly smaller opening
- The package features two chrome wands with nylon friction collars to help them stay in place without them wedging together so they can never be separated. A 12” natural fill floor brush and a combination nozzle which is ideal for area rugs door mats. A basic accessory set including a 10” crevice, 4” dusting tool, and 5” upholstery. The mesh caddy bag allows you to collect and store the tools on the hose hanger with the hose in a bag that gives you visibility
- The 91431 is compatible with all major brands of central vacuum including beam, eureka, vacuflo, vacu-maid, imperium, cyclovac, star power, canavac, Hayden, air vac, md, and nutone systems not using the nutone branded square inlet
- Industry standard wall valves and utility inlets on central vacuums that include this feature have the same inner diameter and will accept this hose end. The metal band will activate the low voltage control of your vacuum turning it on as it is inserted
The 91431 is designed to be a general use straight air accessory set for the home, shop, or garage. Often it is used as a second tool set Complimenting the power nozzle or Turbine package that came with the central vacuum. Having a second tool set can save you time and effort moving a tool set from floor to floor in multi-story homes. The hose end is designed for what has historically been industry standard inlets and will activate a system with low voltage contacts in the wall valve. There were a few valves typically produced before 1980 which may use a micro-switch for activation of the vacuum. In most cases the 91431 will still work but the automatic activation of the system will not be delivered by the banded cuff. The set includes a full range attachments for most standard household cleaning jobs. This set is deal for a basement, garage, or general use in the home, especially on hard floor areas. The floor brush is ideal for cleaning hardwood, tile, stone, and vinyl.
By our suggestions above, we hope that you can found Whole House Vacuum Hose 50Ft for you.Please don’t forget to share your experience by comment in this post. Thank you!