Finding your suitable readers for refrigerator ice maker hose kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for refrigerator ice maker hose kit including detail information and customer reviews. Let’s find out which is your favorite one.
651 reviews analysed
1. LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing
Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.
From the Manufacturer
LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.
2. iSpring ICEK Ultra Safe Fridge Water Line Connection and Ice Maker Installation Kit for Reverse Osmosis Systems & Water Filters
- Connects any water filtration system (including reverse osmosis systems) to the ice maker or water dispenser of your fridge
- Delivers crystal clear ice cubes and great tasting RO water to your fridge, superior to inline fridge filters
- Kit includes everything you need for the installation – 20 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, and a compression fitting set. Tested by independent third-party to meet NSF/ANSI Standards
- Durable and easy to install – Push-in quick connect fittings offer easy DIY installation with no tools required
- Push-in quick connect fittings offer easy DIY installation with no tools required
The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.
3. Ice Maker And Humidifier Installation Kit by Choice Hose And Tubing | Poly Tubing, Includes Everything Necessary For Complete Installation
- EASILY CONNECT TO YOUR REFRIGERATOR OR FREEZER. Attach to your fridge / freezer and enjoy a cup of delicious, crisp water with crystal clear ice cubes in no time! Great for both on-the-door ice/water dispensers and in-freezer ice cube machines. Poly tubing is lead-free and completely safe for potable water, and will leave your water tasting as fresh and pure as before.
- SET UP YOUR HUMIDIFIER/EVAPORATIVE COOLER IN NO TIME! Quickly and easily attach to your boiler or furnace, then sit back and enjoy the results. Poly tubing is durable and reliable
- connect your humidifier now and enjoy it for years to come.
- POLY TUBING is durable, reliable, and will leave your water tasting as fresh and pure as before. Set includes ¼” X 25’ poly tubing- enough to comfortably accommodate any ice maker/ humidifier/ evaporative cooler installation.
- COMPLETE INSTALLATION KIT includes poly tubing, self-piercing saddle valve, and fittings This universal, all-inclusive kit is designed with metal fittings to ensure a solid and dependable connection. Included instructions make DIY installation a breeze!
- NO NEED TO TURN OFF WATER. Easily complete installation without the hassle of shutting off your water supply while you work. EASY DO-IT-YOURSELF INSTALLATION. Includes step-by-step instructions. Limited lifetime warranty. Manufacturer part number 509 5100R. Make it yours today!
Get your appliances set up quickly and easily with this ice maker/ humidifier/ evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation! Limited lifetime warranty. Make it yours today!
4. Metpure Ice Maker Fridge Installation Kit – 25′ Feet Tubing For Appliance Water Line With Stop Tee Connection and Valve For Quick Installation, 1/4" Fittings For Potable Drinking Water
- ◼️ COMPLETE ICE MAKER WATER LINE KIT: This kit comes complete with a 25′ white tubing, heavy duty brass universal adapter tee with 1/4″ shut off valve at the water supply end, and a 1/4″ quick connect adapter at the appliance connection end. This kit was put together by field technicians and plumbers to ease their onsite installation and now it is available to the general public.
- ◼️ SUPER DURABILITY: Linear low density polyethylene (LLDPE) line is extremely flexible, crack and impact resistant. It is the perfect material of choice for running fridge water line by professionals due to its high bendability, pliability, and yield that high density PEX line WILL NOT provide.
- ◼️ NO ODOR, NO BAD TASTE, AND NON-TOXIC: The tubing, certified by NSF ANSI 61 to ensure safety for potable drinking water, contains no toxic material and will leave no odor or plastic taste in the water. The heavy duty universal brass valve adapter is lead free to ensure the drinking water that passes through is safe and in compliance with the federal act of Low Lead Content in potable water.
- ◼️ EASY INSTALLATION: The installation is a breeze with Metpure ICEMK2514 Kit. The adapter universally fits both existing supply valve and line, saving you unnecessary trips to the hardware store for conversion adapters. Also the kit comes with a shut off valve so in case maintenance is needed, the water can be turned off with the valve. Moreover, the kit comes with a quick connect female adapter that you simply screw on the end of your point of use without any tools required.
- ◼️ VERSATILITY: This kit is great for a wide variety of applications. Connect at any water source with an existing water supply shut off valve & line and run the tubing to your freezer, refrigerator, ice maker, coffee brewer, water filtration inlet, humidifer, water dispenser, drinking fountain, and many more.
Complete Metpure Ice Maker Fridge Installation Kit put together by field technicians and plumbers. This complete kit is field tested and approved by professionals to be installed as water line connection from an existing water supply valve & line to your point of use, such as a freezer, refrigerator, icemaker, water dispenser, humidifer, water filtration system, drinking fountain, coffee maker, and many more.
Will this kit work for my connection?
I like to connect this from my undersink water supply valve and line and run this to my fridge – YES.
I have a dedicated water supply valve behind my refrigerator and would like to use this kit to connect – NO.
I have an existing water filtration system, such as an RO system, and would like to split the filtered water into my fridge – NO.
I would like to connect this from an angle supply valve & line and connect to my ice maker – YES.
What’s included in the product?
QTY 1 roll: 25′ of 1/4″ OD white-colored NSF certified LLDPE tubing
QTY 1 package: Metpure EZROADP14 – includes 1/2″ x 3/8″ reducing nipple, 1/2″ x 3/8″ universal adapter tee, 1/4″ quick connect ball valve
QTY 1: 1/4″ female x 1/4″ quick connect adapter
QTY 1: installation manual
5. Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
6. Eastman 48398 Copper Ice Maker Installation Kit with Self-Piercing Saddle Valve and 15 ft. Copper Tube
- CONTENTS: Eastman’s 15 foot Copper Icemaker Installation Kit includes everything you need to connect a water line to your icemaker. The icemaker installation kit includes 1/4-inch x 15′ Copper Tube, Self-piercing saddle valve,1/4-inch Union, Female flare x 1/4-inch Comp adapter
- COMPATIBILTY: It is a universal icemaker hookup kit which can easily fit most major refrigerator brands. The 15 ft. roll of copper tubing can be cut to length for a perfect fit
- DURABLE: The copper body of the tube provides long-lasting durability
- MATERIAL: The tube is made of high quality, heavy-duty copper which provides strength and durability
- EASY INSTALLATION: The ice humidifier package includes additional hardware which makes it easy to install without any hassle
The Eastman 48398 Ice Maker Installation Kit is the perfect solution for any household. It includes a 15 Feet tube which is made of high-quality copper that provides strength and durability. The 15 ft. roll of copper tubing can be cut to length for a perfect fit.
The kit is universal which fits many major refrigerator brands with ease and provides water to ice-makers, ice and water dispensers. The package includes 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. The Eastman Icemaker Installation Kit includes everything you need to connect a water line to your icemaker.
From the Manufacturer
Eastman’s 15′ Copper Installation Kit includes everything you need for easy installation. The kit fits most refrigerators and provides water to icemakers, ice and water dispensers. Packaging includes a 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. Additional installation hardware is included.
7. Kelaro Ice Maker Connector Hose, 10-Foot Stainless Steel – 1/4" Compression Connections – Lead Free
- 10 FOOT LONG, 1/4″ Compression Thread x 1/4″ Compression Thread Stainless Steel Braided Ice Maker Installation Kit
- EASY TO INSTALL. Connect most refrigerator ice makers, in-door water dispensers and filters to household water supply. Perfect for Homeowner or Contractor Installation
- Premium Grade 304 STAINLESS STEEL, PVC Core. BRASS nuts, ferrules and nipples for superior Corrosion Resistance
- BURST PROOF Icemaker Hose Design and 5 YEAR Limited Warranty
- LEAD FREE AB 1953 Safe for drinking water, UPC (Uniform Plumbing Code), NSF 61 (National Sanitation Foundation) and CSA (Canadian Standards Association) Certifications
Stainless Steel Ice Maker Supply Line Hose 10 Ft (120-in) Burst Proof 1/4″ Compression Connections – Lead Free
8. Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
- LENGTH: The line length of this ice maker connector is 25-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
9. FS-TFC Ice Maker Water Line Kit and Refrigerator Water Line Fridge Water Line Kit for Reverse Osmosis Systems & Water Filters, 25ft 1/4" Tubing with 1/4" Push-In and Compression Fittings
- 【Easy installation】Push-in quick connect fittings offer easy DIY installation with no tools required
- 【Compatibility】Works with most reverse osmosis and water filter systems using 1/4 inch standard tubing
- 【Effectiveness】Enjoy clear & delicious pure ice cubes and RO water at your fridge dispenser
- 【Multi-purpose】Provides water to refrigerators,Reverse Osmosis (RO) filter system,ice makers, water coolers and dispensers, humidifiers and more
- 【Pakage includes】Kit includes 25 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, a compression fitting set.
Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.
By our suggestions above, we hope that you can found Refrigerator Ice Maker Hose Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!