Top 10 Ninja Bl492w Blade

0
828 reviews analysed

1. 2 Pack Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blades Part for Nutri Ninjia Blender Blade fits Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013

2 Pack Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blades Part for Nutri Ninjia Blender Blade fits Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013

Feature

2. joystar 2pcs replacement parts blade with 7 male fins assembly extractor blade gasket for 1200W Ninja Auto-IQ Smooth Boost Blender:BL490 30/BL491 30/BL492 30/BL492W 30/ BL493Z 30/BL494 30 (10, 20)

joystar 2pcs replacement parts blade with 7 male fins assembly extractor blade gasket for 1200W Ninja Auto-IQ Smooth Boost Blender:BL490 30/BL491 30/BL492 30/BL492W 30/ BL493Z 30/BL494 30 (10, 20)

Feature

Description

Width:10.0 Centimeters |  Display Height:20.0 Centimeters

Best Accessories / Replacement Parts FOR Nutri Ninja Blander- Pro Extractor Blades Assembly FOR Nutri Ninja,The Pro Extractor Blades Assembly is compatible with Tritan Nutri Ninja cups, Stainless Steel Nutri Ninja Cups and the XL 48 oz. Multi-Serve Nutri Ninja Jar. Compatible with:1200W Ninja Auto-IQ Smooth Boost Blender:BL490 30/BL491 30/BL492 30/BL492W 30/ BL493Z 30/BL494 30 Note: 1. The rubber garsket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber garsket and be sure it is put snugly into the bottom blade. 2. This bottom blade applies to many models, before purchasing, please check your machine, if 7 fins gear and 4inches, this will fit it. it can’t fit 6 fins Gear

3. Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)

Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)

Feature

Description

Color:7 Fins-4 Inch

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.

KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

4. Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013

Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013

Feature

5. Ninja Blender Replacement Parts, Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Auto Iq Bl642 Nn102 Bl682 Bl2013 and More(1 Pack, 2 Gasket Rubber)

Ninja Blender Replacement Parts, Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Auto Iq Bl642 Nn102 Bl682 Bl2013 and More(1 Pack, 2 Gasket Rubber)

Feature

Description

KIND REMINDER BEFORE PURCHASE: 

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it.

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012. NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70, BL454-70, BL482-70. Please check your model carefully before purchasing.

6. Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)

Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)

Feature

Description

Color:Black

Color:Blade 7 Fins

 

Description:

Item Type: Ninja Blender Replacement Parts for blender

Blade material: stainless steel

Blade shape: Cross blade

*This Ninja Blender Accessories Suit for:

BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

*Not fit for :

BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

 

NOTE:

Two conditions must be met at the same time before purchase:

1: Your original motor base must be 7 fins;

2: Your blender model must identity with our stated model.

The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:

There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.

Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.

Pay attention to before use :

Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.

Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)

Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.

Place the replacement blade onto the cup and screw it tightly until you have a good seal.

Please make sure it in right place and locked tightly.

Do not run your blender over 4 minutes at a time to prevent overheating of the blender.

Packing including:

1 x Ninja blade Replacement

7. Blender Replacement Parts for Ninja, Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Blender Replacement Parts for Ninja, Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Feature

8. Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641

Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641

Feature

Description

Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.

Fits The Following Nutri Ninja Blender Models :
For Nutri Ninja BlendMax DUO with Auto-iQ Boost (BL2012, BL2013)
For Nutri Ninja Auto-iQ (BL480, BL480D, BL481, BL482)
For Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
For Nutri Ninja Auto-iQ Pro Complete (BL487, BL487A, BL488W)
For Nutri Ninja Auto-iQ Blender (BL490)
For Nutri Ninja Auto-iQ System (BL491, BL492)
For Nutri Ninja Auto-iQ Compact System (BL492W)
For Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640, BL641, BL642, BL642W, BL642Z)
For Nutri Ninja Blender System with Auto-iQ (BL680, BL680A, BL682)
For Ninja Intelli-Sense Blender Duo (CT640C, CT641)
For Ninja Intelli-Sense Kitchen System (CT680, CT680A, CT680SS, CT680W)
For Ninja Intelli-Sense Kitchen System with Auto-Spiralizer (CT682SP)
For Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost (NN100, NN100A, NN101, NN102)

If you have any problem about your order, please feel free to contact us.

9. Nutri Ninja Personal and Countertop Blender with 1200-Watt Auto-iQ Base, 72-Ounce Pitcher, and 18, 24, and 32-Ounce Cups with Spout Lids (BL642)

Nutri Ninja Personal and Countertop Blender with 1200-Watt Auto-iQ Base, 72-Ounce Pitcher, and 18, 24, and 32-Ounce Cups with Spout Lids (BL642)

Feature

10. Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Blade 7 Fins)

Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Blade 7 Fins)

Feature

Description

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance

2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it

3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)

4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line

5. Place the replacement blade onto the cup and screw it tightly until you have a good seal

6. Please make sure it in right place and locked tightly

7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

Conclusion

By our suggestions above, we hope that you can found Ninja Bl492w Blade for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general