Top 9 Copper Pipe For Ice Maker

0

Finding your suitable readers for copper pipe for ice maker is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for copper pipe for ice maker including detail information and customer reviews. Let’s find out which is your favorite one.

525 reviews analysed

1. Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length

Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel - 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length

Feature

Description

Size:6 Feet

Product Description

This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

2. LDR 509 5110 Self Piercing Copper Saddle Valve, 3/8-Inch to 3/4-Inch

LDR 509 5110 Self Piercing Copper Saddle Valve, 3/8-Inch to 3/4-Inch

Feature

Description

Product Description

LDR 509 5110 Self Piercing Saddle Valve For 3/8-Inch to 3/4-Inch, Copper. Saddle valve. For 3/8-Inch to 3/4-Inch copper or iron pipe with 1/4-Inch o.d. outlet. Self-piercing. Allows tapping of a water supply line without turning off the water. Limited lifetime warranty.

From the Manufacturer

LDR 509 5110 Self Piercing Saddle Valve For 3/8-Inch to 3/4-Inch, Copper. Saddle valve. For 3/8-Inch to 3/4-Inch copper or iron pipe with 1/4-Inch o.d. outlet. Self-piercing. Allows tapping of a water supply line without turning off the water. Limited lifetime warranty.

3. LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing

LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing

Feature

Description

Style:Kit |  Size:Poly Tubing

Product description

Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.

From the Manufacturer

LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.

4. Eastman 48398 Copper Ice Maker Installation Kit with Self-Piercing Saddle Valve and 15 ft. Copper Tube

Eastman 48398 Copper Ice Maker Installation Kit with Self-Piercing Saddle Valve and 15 ft. Copper Tube

Feature

Description

Product Description

The Eastman 48398 Ice Maker Installation Kit is the perfect solution for any household. It includes a 15 Feet tube which is made of high-quality copper that provides strength and durability. The 15 ft. roll of copper tubing can be cut to length for a perfect fit.

The kit is universal which fits many major refrigerator brands with ease and provides water to ice-makers, ice and water dispensers. The package includes 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. The Eastman Icemaker Installation Kit includes everything you need to connect a water line to your icemaker.

From the Manufacturer

Eastman’s 15′ Copper Installation Kit includes everything you need for easy installation. The kit fits most refrigerators and provides water to icemakers, ice and water dispensers. Packaging includes a 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. Additional installation hardware is included.

5. Hydro Master 0540001 1/4 IN x 15 FT Copper Tubing Ice Maker and Humidifier Installation Kit, Lead Free

Hydro Master 0540001 1/4 IN x 15 FT Copper Tubing Ice Maker and Humidifier Installation Kit, Lead Free

Feature

Description

Thanks for choosing Hydro Master!

Kit includes: 1 copper tubing+1 self-piercing tap valve and clamp+2 compression unions +2 plastic sleeves+1 brass sleeve+1 compression nut+2 brass inserts
Size: 1/4″ x 15′
Material: copper
Weight: 1.27lbs (579g)

INSTALLATION

1.Choose convenient cold water supply line
2.Install saddle valve, following those instructions carefully. 1/4″ hole must be drilled if installing onto steel pipe
3.Connect copper tubing to saddle valve using brass sleeve
4.Connect tubing to the refrigerator using either the 1/4″ tube x 1/8″ male pipe straight adapter, or the 1/4″ tube x 1/8″ male pipe elbow
5.Turn on water supply at saddle valve slowly, and check all connections for leaks before replacing refrigerator in its original place

NOTE: WHEN INSTALLING TUBING, BE SURE THAT TUBING IS INSERTED IN FITTING AS FAR AS IT CAN GO.

6. SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

Feature

Description

Size:1/2″ x 1/2″ x 1/4″

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

7. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft

Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft

Feature

Description

Size:15-Foot

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

8. Sharkbite 25033A Ice Maker Outlet Box with Water Hammer Arrestors, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Sharkbite 25033A Ice Maker Outlet Box with Water Hammer Arrestors, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Feature

Description

Style:With Water Hammer Arrestors

SharkBite Ice Maker Outlet Box with Water Hammer Arrestors
The SharkBite Ice Maker Outlet Box with SharkBite quarter turn push-to-connect fittings allow for simple installation of a water main supply line with a quick and easy shutoff valve for refrigerator, ice maker, and water dispensers. This product is lead-free compliant and is offered with water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite lead free quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

9. Anderson Metals Brass Garden Hose Fitting, Swivel, 3/4" Female Hose ID x 1/4" Male Pipe

Anderson Metals Brass Garden Hose Fitting, Swivel, 3/4" Female Hose ID x 1/4" Male Pipe

Feature

Description

Size:3/4″ NPT Female Hose ID x 1/4″ GHT Male

This Anderson Metals swivel garden hose connector is made of brass and connects GHT threaded hose to an NPT threaded connection in a straight run. This coupling has female garden hose threads (GHT) for connecting to a male GHT connector on one end and male NPT threads on the other end to connect to a female NPT threaded connection for a tighter seal than straight threads. This connector is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Conclusion

By our suggestions above, we hope that you can found Copper Pipe For Ice Maker for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general