974 reviews analysed
1. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
Feature
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
Description
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
2. Tailonz Pneumatic 1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit 10 Spliters+10 Elbows+10 tee+10 Straight (40 pcs)
Feature
- 【Product Name】1/4 ‘’ Plastic Push to connect fittings (40Pcs)
- 【Fluid Type】Air Only【Applicable Tube】Pu/Nylon/Soft PE tube
- 【Pressure Range】0~145Psi【Temperature Range】0-60°C | 32～140°F
- 【Advantages】High pressure resistance, easy installation and long service life.
- 【Others】Easy to install: Available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
3. Dorman 47380 Vacuum Connector Value Pack, 65 Piece
4. NIGO Industrial Co. 3-Way Tee Brass Hose Fitting (3, 1/8" x 1/8" x 1/8" Barb)
Description
Products Features
* Constructed from forged brass
* All Nigo’s products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16
* NPT threads on all Nigo’s products meet ASME B1.20.1
* Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air
* 1/8” Barbed fitting has three openings for connecting your 1/8” ID hoses
* Temperatures range from -40 to 160 F
* Max. Pressure: 150 PSI WOG
* Connections: Hose Barb x Hose Barb x Hose Barb
About Us
Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2008 Quality Management System standard.
5. Swpeet 12Pcs 6 Style 6mm Push to Connect Tube Fitting Assortment Kit, Including PL-1/4-N1, PL-1/4-N2, PC-1/4-N1, 1/4 inch od, 1/4 inch Od Y Spliter, PUC-1/4 Push to Connect Tube Fitting
Feature
- ☎ HIGH QUALITY —- These fittings are selected very high quality and the best part is they already have teflon tape so all you need to do is pull them out of the bag and thread them in.
- ☎ BODY STYLE —- In this kit, You will get 6 different styles tube fittings, These tube fittings body style including Male Elbow, Union Straight, Male Straight. Different Styles can meet different needs.
- ☎ TUBE FITTING SIZES —- PL-1/4-N1: Male Elbow – 1/4″ Tube OD x 1/8″ NPT Thread
- PC-1/4-N2: Male Straight – 1/4″ Tube OD x 1/4″ NPT Thread
- PL-1/4-N2: Male Elbow – 1/4″ Tube OD x 1/4″ NPT Thread
- 1/4 inch tee
- 1/4 inch y spliter.
- ☎ FLUID TYPE —- Air Only. Admitted, Air Vacuum Water liquid fit push to connect fitting kits quick connect fitting water (no freezing), Elliptical sleeve configuration is ideal for easy to push and release the tubing.
- ☎ WHAT YOU GET —- We have prepared 12 Pieces 6 different styles of tube fitting for you to meet your different needs, including 2Pcs PL-1/4-N1, 2Pcs PL-1/4-N2, 2Pcs PC-1/4-N1, 2Pcs 1/4 inch od , 2Pcs 1/4 inch od y spliter, 2Pcs PUC-1/4. Applicable Tube: Polyurethane and Nylon.
Description
✿ Swpeet 12Pcs 6 Sizes 6mm Push to Connect Tube Fitting Assortment Kit
★ WHY CHOOSE US?
✔ 1, Good quality fittings and worked well for the application. Effectively prevent the jam from happening! Widely used for connecting bowden extruder.
✔ 2, Easy to use push to connect for air tubing. Nice that the threads already have sealing compound, no teflon tape needed.
✔ 3, Easy to disconnect tube by one push on the black cap.
★ Specification:
☞ Thread: 6mm
☞ Net Weight: 6g/pcs
☞ Material: Stainless Steel and Plastic
☞ Color: Black and Silver
★ User’s Guide:
1. Except air and water,don’t attempt to use the fittings on other fluids.
2. The tube fitting is prohibited where spark and fire might be occurred.
3. The tube fitting is prohibited if water temperature is above 60’C.
4. Never apply tube joint with additional external load(bending,twist or pulling),otherwise damage or leakage will be occurred.
★ Package Include:
▲ PL-6mm-N1 Connect Tube Fitting ———– 2Pcs
▲ PL–6mm-N2 Connect Tube Fitting ———– 2Pcs
▲ PC–6mmN1 Connect Tube Fitting ———– 2Pcs
▲ 6mm od Connect Tube Fitting ———– 2Pcs
▲ 6mm od y spliter Connect Tube Fitting ———– 2Pcs
▲ PUC-6mm Connect Tube Fitting ———– 2Pcs
6. Tailonz Pneumatic Male Straight 1/4 Inch Tube OD x 1/8 Inch NPT Thread Push to Connect Fittings PC-1/4-N1(Pack of 10)
7. Brass Hose Barb Tee 1/8" x 1/8" x 1/8" Barbed T -Fitting 3 Ways Hose Union Pack of 5
Feature
- 1/8″ barb tee to connect 1/8″ I.D. hose,we can provide customized orders,including oem.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- Fitting connects to hose on all ends
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Description
This 1/8″ barb tee is made of brass and connects three lengths of hose in a branch tee.
Barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
This fitting is for a fixed connection between plastic or rubber hose. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of 32 to 200 degrees F.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.
When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability.
Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
8. Legines Barb Tee, 1/8" x 1/8" x 1/8" Hose Barbed T Fitting, Brass 3 Way Union, 2 pcs
Feature
- Barb tee is used to connect lines for air, fuel, oil and inert gases in a quick and simple way.
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose
- Typical Application: Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Legines barb tee is made of solid brass and connects three lengths of hose in a branch tee. Barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
This fitting is for a fixed connection between plastic or rubber hose. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of -40 to 160 degrees F.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability.
Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
9. Metalwork Brass Reducing Hose Barb Splice T-Fitting, Reducer Tee Union Mender Joiner, 10mm Barb x 6mm Barb x 10mm Barb, 3/8" x 1/4" x 3/8" Hose ID (Pack of 2)
Feature
- Tee for connecting and branching three hoses
- Fitting connects to hose on all ends
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)
- For use with plastic or rubber hose
Description
This hose fitting is made of brass and connects three lengths of hose in a branch tee. Barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately). This fitting is for a fixed connection between plastic or rubber hose. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of 32 to 200 degrees F.
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
About Shipping:
All items will be shipped in 3 to 4 days after you ordered;
Usually your package will arrived in the USA in 5 to 12 business days;
The package may be delay because of weather and strike etc.
You can track your package according to the tracking number, which logistic information can be inquired on this website: www.17track.net.
If you don’t received your package after it shipped two weeks, or received wrong size, please contact us before you leave feedback, thank you!
10. Utah Pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch od y spliter Push Fit Fittings Tube Fittings Push Lock (1/4 inch y spliter)
Feature
- Type:air hose fittings/push fit/Push to connect y spliter/ Weight: 2.7 ounces/Size:1/4 inch od
- Fluid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect fitting water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Stainless Steel(SUS)/Body:Plastic(PET)
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
Description
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
Conclusion
By our suggestions above, we hope that you can found 18 14 Vacuum T for you.Please don’t forget to share your experience by comment in this post. Thank you!
